If you are thinking of getting some kitchen cabinets for your home, you will be better off if you use real wood as opposed to synthetic materials. Wood may be more expensive but its natural warmth, beauty and durability make up for its cost. If a dealer refers to cabinets as made out of real wood, fact of the matter is it is true most of the time as cabinets are normally made out of a variety of different wood products. Plywood for instance, is real wood and the same can be told for particleboards. If you are unsure whether what you are buying is real wood or not here are some tips to guide you.
According to custom cabinet makers Rogers MN, cabinets are quite rarely constructed of wood in its entirety. For example, the sides or the jambs are usually hardwood plywood while the shelves; bottom, tops and structural jambs are fir plywood or particleboard. The drawer sides are made either from solid wood, particleboard or plywood. The drawer bottoms are almost always from hardboard, which is essentially a dense particleboard material or plywood
Front and Doors
According kitchen cabinet makers Maple Grove Minnesota experts, cabinet face-frames are usually built with just about anything but solid wood. However, the doors and front drawers can be of solid wood, hardwood plywood or a blend of both materials. Raised-panel doors are solid wood while inset or shaker style doors and fronts use a solid wood frame with hardwood plywood at the core.
How to Know
Check the Side
Look at the side of the door or any exposed edge for grain pattern wraps around corners and edges. These should match on the front and back of the door. Side-grain patterns are usually elongated and run parallel along the edge. False wood on the other hand feature grain patterns that usually connect at 90 degrees along edges.
Check the Seams
Examine for seams around the edges. They usually appear slightly whitish in areas where the glue has not been removed completely. The presence of loose flaps and open cracks are signs that it is not made from solid wood materials.
Laminated products are usually sharp while solid wood is normally blunted or rounded around the edges.